科力传感器科技(东莞)有限公司

国内工业安全/检测/测量光幕供应商

Safety light curtains escort our safe production! We have often encountered this situation. Many employees may encounter extreme risks such as finger-breaking when conducting risky mechanical operations. At this time, if our risk The safety light curtain is mechanically equipped to avoid this situation.
If the workers are injured in the operation, the enterprise must make certain compensation. This is a work-related accident. Generally, the moment is broken together. In terms of compensation, at least 20,000 or more, and the broken finger is the right thing. The workers are also suffering more, so it is necessary for the risk machine to install a safety light curtain.
Regarding the punching machine, the stamping operation is a single repetitive operation, and the operator must be highly concentrated. The worker's body can't be eaten for a long time, and the machine will encounter mechanical failures. This is even more difficult to prevent. Now, the safety light curtain can completely maintain the workers without having to worry about not having to suffer from broken fingers. The principle of the safety light curtain is that only when people's fingers block the light curtain in the middle, the signal will stop the machine, so that the workers can operate without fear of mechanical pressure, and fundamentally maintain Personal safety!
There is too much news about the pressure on the workers, and the risky operation is always horrifying, the efficiency of the operation will be affected, and the device of the punch maintenance device is on various potentially dangerous down-pressure machines to avoid workers. During the operation, we may have a crush or an accident!
The principle of the safety light curtain is that the illuminator announces that several beams do not see the infrared beam, and the receiver receives the infrared beam from the illuminator to form a rectangular detection light curtain. The entire set of safety light curtains is explored by beam-by-beam scanning. Any opaque object larger than a certain scale (such as a part of the operator's human body, opaque workpiece, etc.) invades the light curtain area, and shading is formed. When the safety light curtain detects the shading, it will enter the "abnormal" condition within 20ms of the response time - the interrupt output (such as the relay from the closed to the open condition, the transistor enters the cut-off condition, etc.).
In order to ensure your own interests and the interests of employees, it is expected that each risk machine building can install a safety light curtain to give our employees a safe working environment.